• Broad-spectrum biocide for use on all exterior hard surfaces
• Kills moss, algae, lichen, mould and bacteria
• Works within 2-4 days with no scrubbing or rinsing
• Long-lasting protection against regrowth
• Bleach-free and non-acidic formula
• Safe for use on most outdoor materials
• Easy to apply using a handheld or backpack sprayer
• Covers approximately 175m ≤ per 5L on smooth surfaces

How does MMC Pro work?

MMC Pro is a multipurpose product that combines the properties of an antiviral and antibacterial disinfectant, fungicide, algaecide and detergent. MMC Pro contains DDAC, a quaternary ammonium compound that disrupts the cell membranes of moss, algae and mould, leading to natural decay and removal. Once applied, the MMC Pro solution begins to work within a few days, breaking down biological growth without the need for manual cleaning.

Where to use MMC Pro

MMC Pro is suitable for use on a wide range of exterior hard surfaces, including:

• Masonry and stonework: brickwork, masonry, render, plaster, mortar, slate, stone
• Roofing and exterior walls: roof tiles, concrete, painted surfaces
• Ground surfaces: driveways, paving, tarmac, asphalt, concrete, gravel, pavements, pathways
• Outdoor structures and features: decking, fencing, car parks, playgrounds, tennis courts
• Delicate and smooth surfaces: fibreglass, plastic, metal, glass
• Heritage and specialist use: headstones, monuments

It is effective on smooth and rough surfaces alike, with the 5L pack covering approximately 175m ≤ for smooth surfaces and 100m ≤ for rough surfaces.

When to use MMC Pro

MMC Pro can be applied year round in temperatures above freezing. For best results, apply on a dry day with no rainfall forecast for at least 5 hours so the chemical can absorb properly.

Coverage will vary depending on surface type:

• Rough surfaces: up to 100m²
  
• Smooth surfaces: up to 175m²
  

Actual coverage may depend on the level of contamination and surface porosity.

How to use MMC Pro

• Dilute MMC Pro with clean water, from 1:4 for heavier growth to 1:9 for light growth
• Apply using a low-pressure handheld or backpack sprayer
• Leave to dry. Do not rinse off and no scrubbing needed
• Results will start to appear in 2-4 days

Contact us for quantity prices